19L Polycarbonate Bottle Blower | 19 Litre PC Bottle Making Machine

Type: Raw Material to Bottle (no need of Preforms)

Feed material: Polycarbonate (PC) raw material (in granules)

Bottle volume: 19 litre

Production capacity: 60 pcs/hour (19 Litre)

1) Plasticizing System

Screw Diameter (mm): 85

Ratio of Screw Length/Diameter (L/D): 28

Plasticizing Rate (kg/hr): 80

Injection Stroke (mm): 360

Screw Speed Range (rph): 10-56

2) Clamping System

Clamping Force (kN): 190

Clamping Stroke (mm): 350

Mould Thickness Range (mm): 370-410

Max Opening between Platens (mm): 720

3) Power Consumption

General Power (kW): 84

Hydraulic Motor (kW): 37

Electrical Heating Power (kW): 44

Average Electricals Power Rating (kW): 58

4) Air Source Connection

Required air source pressure: min. 6-10 bar; Air consumption: 0.4M3/min..

5) Water Source Connection

Required water pressure: min. 2-3 bar; Water consumption: 6M3/min.

6) Control System

100-point wall thickness control, 6" colour display.

7) Machine Dimensions

4,985(L) x 1,465(W) x 2,765(H) mm

8) Machine Weight

6 tons (not including hydraulic oil and mould)

9) Production Capacity

>= 60 bottles/hour (based on qualification rate of 98%)

---

What do you need to prepare for making PC (Polycarbonate) Bottles?

PC resin granules in bags. Simple and the PC resin is easy to buy locally.

Process:

1. Feed PC resin in the Hopper Dryer on the floor. 

2. The PC resin is loaded into the Hopper Dryer on the machine top through the Autoloader.

3. PC resin is melt in the machine.

4. Melt PC resin coming into the mould.

5. Melt PC resin is shaped into a bottle in the mould.

6. The mould is open and take out the bottle. 

Very simple. Easy to buy material and easy to operatre. 

What kind of bottles does the machine can make?

2-5 gallon bottles with or without handle.